This research paper investigates an LED strip lighting system, whose LED lighting controller was developed based on the PIC24FV32KA302 microcontroller and PCA9685 PWM driver. During the study, various parameters of the system were evaluated, including the response time from the length of commands, the dependence of the PWM signal characteristics on the logic values generated by the microcontroller, and the dependence of the LED light flux and power on the percentage of the PWM signal and the power of the power supply channels. The results of the study revealed that the reaction time depended on the length of the sent command, where as the logic values of the microcontroller were changed from 1000 to 4000, the size of the PWM signal changed from 25 to 100%. The use of the I2C communication protocol, which is a master–slave architecture and uses data and synchronization lines, was also found to affect response times. When the percentage of the PWM signal was changed from 10 to 100%, the light flux of the LED strip changed from 100 to 1000 lm. These results reflect the advantages of applying microcontrollers and PWM drivers to LED control systems, emphasizing their flexibility, efficiency, and precise light control.
Loading....